QT40-3A widely used concrete block making machine for sale in usa detail
Dongyue Machinery Group is leading block machine manufactuer in China.Our main products are Various automatic and manual concrete block machine,AAC Block machine,ALC block machine,Sand lime block machine and pressure vessel.Our proudcts has been exported to more than 60 countries.
(1) QT40-3A small hollow block making machine Main technical parameters:
Host machine power
Dimension of host machine
No need pallets
Weight of the host machine
General water Consumption
2) QT40-3A small hollow block making machine operation process
|The prepared material should be put into the mold box dustpan by the Material car
|press the 3 BUTTON and at the same time let the material flat.
|press the4 BUTTON on the mold advance to the next mold decoupling above the same time
press the BUTTON 5 when the up-mould at it’s position ,at the same time put the hydraulic
control lever forth. At this step ,the down mould will be rise ,it will be make the brick shape successfully.
after the in shape ,the machine will forth automatically and stop the moving automatically
,then make the hydraulic control level back in order to make the down mould drop on the groud
|press the BUTTON6 make the up mould on the back ,then put the material by car in cycle.
3.QT40-3A small hollow block making machine Daily Maintenance
1.Before producing block, test run the machine without material for 2-5 minutes,if the machine
works properly,start to produce with raw material in case that there is obstacles during production.
2.Prohibit to repair machine during production process,must cut the electricity firstly,then check